• Prevention of mat glazed acid permeability used in monoporosa wall ceramics 

  Üstünel, Gizem; Yenikaya, Cengiz; Bekmezci, Muhammed; Şen, Fatih (Elsevier, 2021)

  The ceramic industry has made important technological breakthroughs in the last half century. Visually ideal forms are obtained. In addition, it is very important to obtain ceramics resistant to physical and chemical ...

• Investigation of a diagnostic group of Bronze Age pottery (Dark Rimmed Orange Bowl ware) from the upper Tigris Valley, Turkey 

  Bayazit, Murat; Işık, İskender; Kozbe, Gülriz; Güngör, Akarcan; İssi, Ali (John Wiley and Sons Ltd, 2021)

  This study focuses on the archaeometry characterization of representative Dark Rimmed Orange Bowl wares from different sites of the upper Tigris Valley and dated to the Bronze Age. The chemical composition of the potsherds ...

• Effects of nano-sized titanium dioxide powder and ultraviolet light on superficial veins in a rabbit model 

  Ada, Fatih; Kasımzade, Ferit; Mendil, Ali Sefa; Göçmez, Hasan (Wroclaw University of Medicine, 2021)

  Background. Titanium dioxide (TiO2) is widely used in many fields such as food, cosmetics, and paper industries. Studies on the photocatalytic properties of TiO2 on living tissue are limited. Objectives. To examine the ...

• Production of ceramic glass foam of low thermal conductivity by a simple method entirely from fly ash 

  Cengizler, Hakan; Koç, Muhterem; Şan, Osman (Elsevier, 2021)

  Ceramic glass foam/foams (CGF) from two different F-class fly ashes were produced via a well-known simple conventional sintering method using sodium silicate (Na2SiO3) as a foaming and fluxing agent. The research aimed to ...

• Effects of doping content and crystallite size on luminescence properties of Eu3+ doped fluorapatites obtained from natural waste 

  Demir, Burak; Derince, Dilara; Dayıoğlu, Tolga; Köroğlu, Levet; Karacaoğlu, Erkul; Uz, Veli; Ayas, Erhan (Elsevier, 2021)

  In this study, Eu3+ doped natural fluorapatites [Ca10(PO4)6F2:xEu3+ (x = 0.1, 0.3 and 0.5)] were produced from a natural waste by solid-state powder synthesis, conventional sintering, and spark plasma sintering techniques. ...

• Katkılandırılmış (Eu, Dy, Sb, Co, Tb) Baryum Titanat Seramiklerinin (Batio3) Dielektrik ve Manyetik Özelliklerinin İncelenmesi 

  Gergeroğlu, Hazal; Ebeoğlugil, M. Faruk; Taşçı, Eda (Kütahya Dumlupınar Üniversitesi, 2020)

  Bu çalışmada üstün piezoelektrik ve ferroelektrik özellik gösteren Baryum Titanat (BaTiO3) seramik tozları karıştırılmış oksit yöntemi ile üretilmiştir. Daha sonra eşit mol yüzdesinde Evropiyum (Eu), Disporsiyum (Dy), ...

• Effect of La2O3 Addition on the Thermal, Microstructure and Mechanical Properties of Mullite-Zirconia Composites 

  Aydın, Hediye (Iranian Journal of Materials Science & Engineering, 2019)

  Mullite-zirconia composites were prepared using lanthanum oxide (La2O3) additive at three different molar ratios via reaction sintering (RS) of alumina, kaolinite and zircon. Starting materials were planetary milled, shaped ...

• Fabrication and vibrational energy harvesting characterization of flexible piezoelectric nanogenerator (PEN) based on PVDF/PZT 

  Koç, Muhterem; Paralı, Levent; Şan, Osman (Elsevier, 2020)

  In this study, polyvinylidene difluoride (PVDF) is doped with different volume levels (10, 20, 30 vol %) of lead zirconate titanate (PZT), and neat PVDF (undoped) electrospun nanofibres are prepared by aligning them through ...

• Production of TiO2 coated alpha-Al2O3 platelets by flame spray pyrolysis and their characterization 

  Kaya, Güray; Günhan, Büşra; Özer, İsmail Özgür; Poyraz, Hüseyin Boğaç (Elsevier, 2020)

  In this study, the applicability of the flame spray pyrolysis (FSP) method in the production of alpha-Al2O3 based TiO2 coatings was investigated. Plate-like alpha-Al2O3 particles, with a particle size of 8-30 mu m, were ...

• The effect of granulated lead-zinc slag on aesthetic and microstructural properties of single-fired wall tile glazes 

  Öztürk, Zahide Bayer; Pekkan, Keriman; Taşçı, Eda; Yılmaz, Suna (Springer, 2020)

  Recycling of industrial wastes could reduce environmental pollution and decrease final production costs for the relevant sectors. Some of the solid wastes originating from metal production industries, including slags, ...

• Development of temmoku glazes and their applications onto different tiles under industrial fast firing conditions at 1180 degrees C 

  Pekkan, Keriman; Taşçı, Eda; Gün, Yalçın (Springer, 2020)

  Temmoku glazes are special and artistic glazes that are used in certain applications. Temmokus are either slip glazes made from ferruginous clay or feldspathic type glazes containing iron oxide. Glaze composition, clay ...

• Mechanochemical-assisted synthesis and characterization of Al2O3/B4C ceramics 

  Gören, Remzi; Koç, U.; Aydın, Hediye (Springer, 2020)

  Synthesis of the Al2O3-B4C ceramic was carried out in this study via mechanochemical method. A highest value of 64.72 m(2)/g was obtained at the end of milling for 6 h during the BET analyses carried out for determining ...

• İkiz merdane yöntemi ile 1xxx serisi alüminyum levha üretimindeki proses parametrelerinin özellikler üzerindeki etkisi 

  Aydın, Hediye; Gören, Remzi; Cengiz, Merve (TÜBİTAK, 2020)

  Bu çalışmada ikiz merdaneli sürekli döküm tekniği ile üretilen 1xxx alaşımlarının alüminyum levha üretimi gerçekleştirilmiştir. 1xxx alaşımları ile üretilen alüminyum levhaların günümüz teknolojisinde üretimdeki proses ...

• The effect of granulated lead–zinc slag on aesthetic and microstructural properties of single-fired wall tile glazes 

  Bayer Öztürk, Zahide; Pekkan, Keriman; Taşcı, Eda; Yılmaz, Suna (Springer International Publishing, 2019)

  Recycling of industrial wastes could reduce environmental pollution and decrease final production costs for the relevant sectors. Some of the solid wastes originating from metal production industries, including slags, ...

• Mechanical properties of zirconia toughened mullite composites fabricated by slip casting 

  Aydın, Hediye; Tokataş, Gizem (Hanyang University, 2019)

  The main objective of this article is to obtain polyphasic ceramics belonging to the Al2O3-SiO2-ZrO2 system by reaction sintering of zircon, alumina, kaolinite and colemanite powder mixture was explored in this work. In ...

• Usage of ZnO containing wastes in the sanitaryware bodies 

  Güngör, Fazilet; Işık, İskender; Güngör, Ersin; Gültekin, Elif Eren (Springer International Publishing, 2019)

  Galvanized waste is characterized from a mineralogical point of view in order to investigate the effects of its utilization in sanitary ware bodies. Galvanized waste was added to a sanitary ware body recipe at 1–10% weight ...

• Capacitive behaviour of nanocrystalline octacalcium phosphate (OCP) (Ca8H2(PO4)(6)center dot 5H(2)O) as an electrode material for supercapacitors: biosupercaps 

  Tuncer, Mustafa; Bakan, Feray; Hamedani, Ali Ansari; Soytaş, Serap Hayat; Göçmez, Hasan; Erdem, Emre (Royal Society of Chemistry, 2019)

  Octacalcium phosphate (OCP) is classified as a low-temperature phase of calcium phosphate (CaPs); it is a widely used ceramic material in biomedical applications. Interestingly, this study demonstrated the capacitive ...

• Production of porous ceramic from clinoptilolite incorporating aluminum powder 

  Şan, Osman; Koç, Muhterem; Cengizler, Hakan (Elsevier, 2019)

  In this study, production of porous ceramic from clinoptilolite incorporating aluminum powder at various sintering temperatures was investigated. The mixtures were sintered at 1150, 1200, 1250 and 1300 °C for 1 h in air ...

• Characterization and production of slip casts mullite-zirconia composites 

  Aydın, Hediye; Tokataş, Gizem (Springer International Publishing AG, 2019)

  In this study, mullite-zirconia composites were prepared by reaction sintering of alumina, kaolinite zircon and colemanite powder. Slip casting method was also employed for production of these composites. Two different ...

• Spark plasma sintering of ZrB2 powders synthesized by citrate gel method 

  Göçmez, Hasan; Tuncer, Mustafa; Bogomol, Iurii (Elsevier, 2019)

  The densification behavior of nanocrystalline zirconium diboride (ZrB2) powders with nickel (5 vol%) is reported by spark plasma sintering (SPS) technique. SPS experiments were performed at 1600 and 1900 °C with 65 MPa ...

View more